小12萝裸体无码视频,中国极品少妇XXXXX,欧美日本日韩,在线看亚洲十八禁网站

當前位置: 選型首頁 >  沃康 >  儀器儀表 >系列介紹

沃康  VNS/VHS   儀器儀表

收錄型號： 0條（帶參數型號： 0 條）

選型指南： 0 條 應用案例： 0 條

安裝調試： 0 條 安裝調試： 0 條

維護維修： 0 條 升級改造： 0 條

收藏

詳細介紹

VNS/VHSseries Pigtail S type

Specification

Dimension

■50kPa~3000kPa

VNS/VHS Pigtail S type
 *Available digital panel meters
   >>Click here for the list.

■Safe and reliable construction integral with break-proof diaphragm.
■Safe and reliable construction with no sealed liquid.
■Electro-chemically buffed wetted surfaces.
■Abundant analog output available.
　[4~20mA(2 wire system/4wire system), 1~5V, 0~5V, 0~10V]

Measured mediumAlcohols, milk beverage, seasoning, pure water, chemical or other media.
(These vary according to sensor materials)
Pressure typePositive, compound, and negative pressures can be measured.
Pressure rangeCan be specified within the range of 50 kPa to 3 MPa (Calibration:25kPa~3MPa) of rated capacity.
Output typeSpecify among 4 to 20 mA (2 wire system/4wire system), 1 to 5 V, 0 to 5 V, 0 to 10V. 
Specify more than 50% of rated capacity as the calibration range.

Specification 1 (Sensor assembly)

Pressure Port Type/SizeISO Ferrule, VARIVENT®, ISO Cap nut, Screw mount, Other special orders
Rated Capacity(R.C.)50, 100, 200, 300, 500, 1000kPa, 3MPa
MaterialSensor: SUS316L / Hastelloy C276 / SUS329J4L
Finish(Sensor Part)Electro-Chemical Buffing
Safe Overload Rating400%R.C. (Rated capacity 3MPa: 150%R.C.)
Destruction Point1000%R.C. (Rated capacity 3MPa: 300%R.C.)

Specification 2 (Amplifier + Sensor assembly)

OutputCurrentCurrent 2wire4~20mA(2 wire system)
Safe Load ResistanceDC24V: 500Ω or less, DC12V: 150Ω or less
CurrentCurrent 4wire4~20mA(4 wire system)
Safe Load ResistanceDC24V: 500Ω or less, DC12V: 250Ω or less
Consumption currentApprox. 35mA
VoltageVoltage1~5V, 0~5V, 0~10V supported
Safe Load Resistance5kΩ or more
Consumption currentApprox. 23mA
Normal temperature accuracy (*1)±0.3%R.C. (Rating: 300, 500, 1000kPa, 3MPa)
±0.35%R.C. (Rating: 50, 100, 200kPa)
Compensated Temperature Range (Wetted part)Standard -5~80?C, High temperature: -5~150?C
Safe Temperature Range (Wetted part)Standard: -5～80?C (150?:30-minute use is possible)/
High temperature: -5~150?C
Temperature Effect on Zero Balance±0.35%R.C./10% (Rating: 300, 500, 1000kPa, 3MPa)
±0.5%R.C. (Rating: 50, 100, 200kPa)
Temperature Effect on Load±0.35%R.C./10% (Rating: 300, 500, 1000kPa, 3MPa)
±0.5%R.C. (Rating: 50, 100, 200kPa)
Ambient Temperature and HumidityTemperature:0~70?C(No freezing), Humidity:0~90%RH(No condensation)
MaterialSUS303(Case material), SUS304(Radiating fin)
IP RatingEquivalent to IP66
WeightStandard: Approx. 500g
High temperature: Approx. 600g
AccessoriesOperation manual (1 copy), Test report (1 copy)

  • (*1) Non Linearity, hysteresis and repeatability included.
    For the ferrule type, however, zero adjustment is to be made after the clamp is tightened.

Model Selection

Model Selection

SelectionCheckModelSpecification
1.Model
VNSStandard type: Temperature range of wetted parts -5~80?C
However, steam sterilization at 150?C is possible up to 30 minutes.

VHSHigh temperature type: Temperature range of wetted parts -5~150?C
2.Analog output--Output typeResponse frequencySafe load resistanceConsumption current

A21~5V500Hz5kΩ or moreApprox. 23mA

A34~20mA
(4 wire system)		DC24V:500Ω or less
DC12V:250Ω or less		Approx. 35mA

A40~5V5kΩ or moreApprox. 23mA

A50~10V5kΩ or moreApprox. 23mA

A64~20mA
(2 wire system)		1kHzDC24V:500Ω or less
DC12V:150Ω or less		-
3.Calibration
Pressurization or Negative pressurePut the output calibration range value and unit in parentheses.
In case of negative pressure, put the calibration range value in parentheses.(*2)

Compound pressurePut the output calibration range value and unit in parentheses.(*2)
4.Rated Capacity(R.C.)
00550kPa Calibration range specification [50.0kPa]

010100kPa Calibration range specification [100.0kPa]

020200kPa Calibration range specification [200kPa] Compound[(-100～200)kPa](*3)Compound pressure: Only in [P], form selection of ⑦Limitation is.

021200kPa Calibration range specification [200kPa] Compound[(-100～200)kPa](*3)(*4)
(Specify this model at calibration for compound pressure if "focus on negative pressure" has been selected.)

030300kPa Calibration range specification [300kPa] Compound[(-100～300)kPa](*3)

031300kPa Calibration range specification [300kPa] Compound[(-100～300)kPa](*3)(*4)
(Specify this model at calibration for compound pressure if "focus on negative pressure" has been selected.)

050500kPa Calibration range specification [500kPa]

1001000kPa Calibration range specification [1000kPa]

3003MPa Calibration range specification [3.00MPa][Make to order]
(Withstand pressure:150%R.C.
ISO Cap nut and Screw mount only)
5.Pressure Port
Type/Size
F1ISO Ferrule 1.5S

F2ISO Ferrule 2S

F3ISO Ferrule 2.5S[Make to order]

F4ISO Ferrule 3S[Make to order]

F6ISO Ferrule 4S[Make to order]

V50AVARIVENT® DN50[Make to order]

V65AVARIVENT® DN65[Make to order]

V80AVARIVENT® DN80[Make to order]

V100AVARIVENT® DN100[Make to order]

R1ISO Cap nut 1.5S[Make to order]　Hexagon nut included (HEX61)

R2ISO Cap nut 2S[Make to order]　Hexagon nut included (HEX76)

M0Screw mount type simple substance Dedicated O-ring included (×1)

M1JIS20K50A With flange, Dedicated O-ring included (×1)

M2JIS20K80A With flange, Dedicated O-ring included (×1)
6.Pressure Port Material
BlankSUS316L, Electro-Chemical Buffing(Ry0.7)
④Supports all rated capacities.
⑤Supports all pressure port type/size.

HS1Hastelloy C276, Electro-Chemical Buffing(Ry0.7)
④Rated capacitor can be selected from among 300, 500 and 1000kPa.
⑤Pressure port type/size can be selected from among F1, F2, F3 and M0.		[Make to order]
Negative pressure and compound pressure are not supported

J4LSUS329J4L, Buffing(#400)
④Rated capacitor can be selected from among 300, 500 and 1000kPa.
⑤Pressure port type/size can be selected from among F1, F2, F3 and M0.
7.Limitation
H400%R.C.(3MPa is not selectable)

PTo be selected only when calibrating negative pressure or compound pressure ("focus on negative pressure" has been selected)(*2)

BlankIt is adapted when rating capacity is 3MPa ±0.3%R.C.
8.Cable Connection
S02Pigtail Standard(Sensor cable 2m attachment, Non-stranded wire)

S03Pigtail(Sensor cable 3m attachment, Non-stranded wire)

S05Pigtail(Sensor cable 5m attachment, Non-stranded wire)

S10Pigtail(Sensor cable 10m attachment, Non-stranded wire)

S□□Pigtail　Other length
*Contact our sales office for other cable lengths.
9.Power
4DC24V(±10%)

5DC12V(±10%)　*Not available when analog output is A5.

  • (*2) Basically the calibration range is within the rated capacity, but other requirements are possible, as long as the range is 50% or more than the rating of the sensor used.

  • (*3) In case of calibration for compound pressure, calibration is performed only for the positive pressure, and only measurement data are given for the negative pressure. In this case, acceptance criterion is within ±1%R.C. When focusing on the negative pressure, it is also possible to perform calibration for the negative pressure and to provide only measurement data (within ±1%R.C.) according to the request from the customer.
    Regarding calibration, specify 020, 030 (focus on positive pressure) or 021, 031 (focus on negative pressure) in ④ above when placing an order.

  • (*4) When calibrating negative pressure and compound pressure ("focus on negative pressure" has been selected), both nonlinearity and hysteresis will be 0.5%R.C.
    Temperature effect on zero balance and load: ±0.7％R.C./10?C or less (Rated 200kPa), ±0.5％R.C./10?C or less (Rated 300kPa)